NEW ARRIVAL

- Manufacturer: Af Radiator

- New air box filter support kit for MINI go karts (color blue), complete with cradle, adjustable multi-hole all-stainless steel support and locking plate. Our new go kart air filter holder is 100% compatible with all types of filters. After careful study AF Radiator has created this type of quick coupling that takes advantage of a sturdy OR allowing easy disassembly and assembly of your air filter in complete safety and reliability. The cradle of the kit is rubberized in order to increase the grip and stability of the filter and to protect it more from rubbing and subsequent wear and tear. Assembling and disassembling your air filter has never been so quick and easy! Also available for OK and KZ category

- Manufacturer: Omp

- Full face karting CMR helmet made in composite material. Lightweight, with soft and comfortable high breathability internal lining, bordered strap with double ring clousure and high precision adjustable visor with easy block system. The air vents and intakes ensure the best air ducting. Spare iridium blue visor included in the box.

- Manufacturer: Vortex Engine

- Intake Silencer Rain Cover 0225.GLB29

NEW PRODUCT

AIRPRO DENSIMETER

This is a instrument designed for professional engine tuners. Our air density meter allows to see if the air density has changed. It could help you determine if the jetting or fuel mapping should be adjusted. Our meter will instantly tell you if the condition has change so the proper changes can be made on the engine. This is a must for performance enthusiasts since it will help get the extra horsepower out of the engine or it could even save the engine from bad damages.ALTITUDE - ATMOSPHERIC PRESSURE - TEMPERATURE - AIR DENSITY - RELATIVE HUMIDITY

Wheel hub extractor with impact hammer is a very useful tool for removing wheel hubs, especially when they are stuck or seized. Compatible with various stud spacings, from 58 to 70mm. However, in the case of very stuck or rusted wheel hubs, it is important to use the tool correctly and with caution to avoid damage.
Some useful tips:
Insert the extractor into the hub studs, making sure it is securely fastened.
Before using the hammer extractor, spray a penetrating release agent on the wheel hub and let it act for a few minutes.
If you are unsure or if the hub is very difficult to remove, it is advisable to contact a professional or a specialized workshop.
Avoid using too much force, as it may cause damage.

- Manufacturer: Alpinestars

- The Alpinestars TECH ZX Series STELLA BRA TOP is made with LENZING™ FR, an innovative and sustainable viscose fiber that offers exceptional flame resistance and protection against heat transfer. This Formula 1-derived underwear is extremely lightweight and thin, and is designed to be incredibly soft to the touch, offering significantly improved comfort when worn under mandatory underwear layers. Certified to FIA homologation standard 8856-2018 for personal underwear.

- Manufacturer: Tillett

- Available in two sizes: C-XS / S-XXL

- Go to the product and select the size

- Manufacturer: Righetti Ridolfi

- Material: Magnesium

- Axle diameter: 50mm

- Length: 72mm

- Keyway width: 8mm

- Manufacturer: Righetti Ridolfi

- Material: Magnesium

- Axle diameter: 50mm

- Length: 114mm

- Keyway width: 8mm

- Manufacturer: Parolin Racing Kart

- Compatible chassis:

- INVADER KZ 2025 (99KIN5M3),
- LE MANS KZ 2025 (99KLM5M3),
- MONZA KZ MAGNESIUM (99KMZ5M_P),
- INVADER KZ 2023 (99KIN5M2),
- LE MANS KZ 2023 (99KLM5M2)

- Position in figure: 200

- Manufacturer: Tillotson

- Carburetor model: Tillotson FM15-1A

- Allowed in categories: MINI KART GR3 UNDER 10

This set includes 51 chrome steel gauge pins ranging from 0.50 to 1.00 mm in diameter, with a progressive step of 0.01 mm, designed for high-precision measurements with very tight tolerances.
Main features:
Quantity and diameter: 51 gauge pins from 0.50 to 1.00 mm.
Progressive step: increments of 0.01 mm (0.50 - 0.51 - 0.52 . up to 1.00 mm).
Precision: class 2 with a tolerance of ±0.002 mm (Rupac MicroMet Plus model).
Material and hardness: hardened chrome steel with high hardness, ensuring dimensional stability and long-lasting durability.
Identification and organization: each pin is individually numbered; the set is supplied in a practical storage case for safe keeping and transport.
Applications: ideal for adjusting and measuring carburetor jets, holes, grooves, or mechanical components where high accuracy is required.
Thanks to their combination of precision, fine progression, and durability, this set is particularly suitable for metrology laboratories and precision mechanical workshops.

This is a complete incremental set of pin gauges diameter from 1,00mm to 2,00mm.
101 pieces
Material: Chrome.plated steel - Hardness 61/64 HRC
Tollerance: ±0,002mm
Case with Handle

- Manufacturer: Tony Kart - Otk

- Kart side: Rear

- Brake model: OTK

- Disc diameter: 180x13mm

- Application: OK - KZ - DD2

- Manufacturer: Righetti Ridolfi

- Manufacturer: Righetti Ridolfi

- Manufacturer: Kg Kart

- Nozzle diameter: 30mm

- Water guard included in the kit

- Manufacturer: Kg Kart

- Nozzle diameter: 23mm

- Water guard included in the kit

- Manufacturer: Kg Kart

- Nozzle diameter: 30mm

- Water guard included in the kit

- Manufacturer: Kg Kart

- Nozzle diameter: 23mm

- Water guard included in the kit

- Manufacturer: XPS

- Mandatory transmission fluid for Rotax races in the DD2 category

- Manufacturer: XPS

- Mandatory transmission fluid for Rotax races in the MAX category

- Manufacturer: Otk

- The kit includes all the wear parts found on the Otk 0097.B0 pump.

- Manufacturer: Arai Helmet

- First deliveries starting June 2026

- The Arai SKV-R helmet is Arai's newest model for adult go-karting.

- Available in sizes: XS - S - M - L - XL

- PRE-ORDER TO ENSURE YOUR FIRST DELIVERY

- Manufacturer: Arai Helmet

- First deliveries starting June 2026

- The Arai GPV-R helmet is Arai's newest model for motorsports, with Hans-compatible attachments.

- Available in sizes: XS - S - M - L - XL

- PRE-ORDER TO ENSURE YOUR FIRST DELIVERY

- Manufacturer: Stilo Helmet

- Color: Clear

- Manufacturer: Stilo Helmet

- Color: Smoked medium

- Manufacturer: Stilo Helmet

- Color: Silver medium

- Manufacturer: Stilo Helmet

- Color: Smoked

- Manufacturer: Stilo Helmet

- Color: Silver

- Manufacturer: Stilo Helmet

- Color: Mirror Blue Medium

- Manufacturer: Stilo Helmet

- Color: Mirror Blue Dark

- Manufacturer: Stilo Helmet

- Color: Mirror Red Medium

- Manufacturer: Stilo Helmet

- Color: Mirror Red Dark

- Manufacturer: Stilo Helmet

- Color: Mirror Yellow Medium

- Manufacturer: Stilo Helmet

- Color: Mirror Yellow Dark

- Manufacturer: Stilo Helmet

- Color: Amber dark

- Not FIA approved

- Manufacturer: Bell

- Manufacturer: Omp

- Manufacturer: Omp

- Manufacturer: OMP

- FIA-approved karting protection.

- Sizes

S (homologated from 116 to 152 cm height – suggested for 63-71 cm chest circumference)

M (homologated from 152 to 170 – suggested for 69,5-80 cm chest circumference)

M wide (homologated from 152 to 170 – suggested for 79,5-90 cm chest circumference)

L (homologated from 170 to 188 – suggested for 77-90 cm chest circumference)

L wide (homologated from 170 to 188 – suggested for 78-100 cm chest circumference)

XL (homologated from 188 – suggested for 90-105 cm chest circumference)

XL wide (homologated from 188 – suggested for 105-120 cm chest circumference)

- The KS-1 PRO adapts to different heights and body types thanks to seven different sizes: four standard sizes (S-M-L-XL) and three large sizes (M, L, XL).

- Colors: Black/Fluorescent Yellow (178)

- Approval: FIA 8870-2018

- Manufacturer: Otk Tony Kart

- High lubricant additives "high pressure" for proper lubrication of chains in the kart industry.
The product can withstand rough handling of the race and the combined action of dust and moisture. Fights and dirty mud very well keeping the correct chain lubrication.
The exceptional results in the most gruelling competitions make it one of the best chain lubricant sports landscape.
Absolutely also suitable for o-ring chains.
- 400ml

- Manufacturer: Easy Kart

- The set includes: 2 Front + 2 Rear

- Championship: Easykart for 50cc - 60cc - KGP categories

- PFU Contribution Fulfilled

- Manufacturer: Easy Kart

- The set includes: 2 Front + 2 Rear

- Championship: Easykart for the 100cc and 125cc categories

- PFU Contribution Fulfilled

- Manufacturer: Easy Kart

- The set includes: 2 Front + 2 Rear

- Championship: Easykart for the BMB Challenge 125cc category

- PFU Contribution Fulfilled

- Manufacturer: Erik Kart

- Trolley equipped with wheels to facilitate movement, also equipped with a loading/unloading system for lifting any type of Kart.

- Robust but at the same time very light, it facilitates your actions.

Try it!

- Manufacturer: Nek

- Diameter: 210mm

- The kit includes: 2 carbon fiber parts and an aluminum center spacer

- Manufacturer: Senzo

- Clutch lock tool. Used for locking the clutch to enable you to undo the clutch or clutch drum without damaging anything.

- Manufacturer: Aim Sportline

- The ACC3 module is an Analog/CAN converter that manages up to 4 analog inputs at a maximum frequency of 1 kHz each.

ACC3 has 2 digital inputs for speed.

- Manufacturer: Righetti Ridolfi

- Forged high-strength aluminum pedal designed to be configured either as a brake or throttle simply by reversing the mounting components.

Multiple holes for adjusting the foot-rest pin allow precise positioning to achieve maximum comfort and control while driving.
The forged structure provides exceptional rigidity, long-lasting durability and an immediate response in every phase of use.
Its design combines lightness, strength and ergonomics, delivering a direct and precise feel-from hard braking to smooth throttle modulation.
The lightweight geometry keeps the overall mass low without compromising robustness, while the racing-style shape ensures a stable grip and a sporty, responsive feedback.
Main features:
Universal use: brake or throttle
High rigidity with no unwanted flex
Compatible with most standard chassis
Color: Magnesium
A versatile, high-performance component for drivers who want a reliable, reactive pedal with a pure racing soul.

- Manufacturer: Vortex Engine

- The kit includes:

Cloth for cleaning the screen

Bottle of soap for applying the film

Anti-scratch PPF film

Application instructions

Spatula for applying film

- Manufacturer: Bell Helmets

- Karting helmet based on the F1 proven HP7 design platform

- Lightweight Carbon Fiberglass Composite shell: 1,185g in sizes 51 to 56 and 1,230g in sizes 57 to 59 (+ or – 3%)

- Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance

- Extra large eyeport for enhanced visibility

- Optical grade injected Double Screen Anti-Fog (DSAF) 2MM visor for anti-fog control and superior visibility

- Color: White

- Position shown: 1

- Manufacturer: Ibea Carturetor

- Latest-approved carburetor for the OKJ class

- Diameter: 20mm

- Model: E1

- Position shown: 1

- Manufacturer: Ibea Carturetor

- Latest-approved carburetor for the OK class

- Diameter: 24mm

- Model: E2

- Position shown: 1

- Manufacturer: Ibea Carturetor

- Latest-approved carburetor for the OK N class

- Diameter: 24mm

- Model: E3

Engine complete with: - homologated Muffler - homologated exhaust silencer ELTO TD3 - engine mount - Carburetor VHSH 30CS - 2 water hose

Not included in both cases the fuel pump

SELECT VERION

- PREPARED 1: SPECIAL CILINDER + SPECIAL CRANKASE 

- PREPARED 2; SPECIAL CILINDER + SPECIAL CRANKASE + SPECIAL CARBURATOR

- PREPARED 3: SPECIAL CILINDER + SPECIAL CRANKASE + SPECIAL CARBURATOR + LUCID SHAFT

- PREPARED 4: SPECIAL CILINDER + SPECIAL CRANKASE + LUCID SHAFT

- Available ignitions: Pvl - Selettra

- SHIPMENTS AVAILABLE FROM DECEMBER 2025

- Manufacturer: Aim Sportline

- Offer 1:( MYCHRON 6 2t S INSTRUMENT - ENGINE RPM PROBE - FREE SHIPPING ITALY )

- Offer 2:( MYCHRON 6 2t S INSTRUMENT - WATER TEMPERATURE PROBE - ENGINE RPM PROBE - EXTENSION FOR DOUBLE TEMPERATURE - FREE SHIPPING ITALY )

- Offer 3:( MYCHRON 6 2t S INSTRUMENT - EXHAUST TEMPERATURE PROBE - ENGINE RPM PROBE - EXTENSION FOR DOUBLE TEMPERATURE - FREE SHIPPING ITALY )

- Offer 4: (MYCHRON 6 2t S INSTRUMENT - EXHAUST TEMPERATURE PROBE - WATER TEMPERATURE PROBE - ENGINE RPM CABLE - EXTENSION FOR DUAL TEMPERATURE - FREE SHIPPING IN ITALY)

- Enter in the product and select the probe

- All kits include: Charger with cable - Race Studio CD - Box

- Manufacturer: Schuberth

- SNELL FIA CMR 2016 Helmet SK1 Carbon is the SCHUBERTH helmet dedicated to the Kart. Thought to protect the head of the future Formula 1 world Champions, it is realize with the same technologies and solutions adopted to the whole Schuberth collection: an exclusivee autoclave moulded Carbon Fiber shell, masterfully handcrafted. 

- Available in sizes: (XXS - 52/53cm) - (XS - 54/55cm) - (S - 56cm) - (M - 57cm) - (L - 58/59cm) - (L+ - 59+cm)

- Manufacturer: Kart Service

- The product includes 2 teams

- Chassis: Tony Kart (MINI KART)

- Pin diameter: 22mm

- Tilt: 11.25°

- Position shown: 1

- Manufacturer: BirelArt

- Manufacturer: Kart Service

- The product includes 2 teams

- Chassis: SODIKART (OK - KZ - MINI KART)

- Pin diameter: 18mm

- Tilt: 10.7°

- Manufacturer: Kart Service

- The product includes 2 teams

- Chassis: TONY KART - PAROLIN - KR (OK - KZ)

- Pin diameter: 22mm

- Tilt: 10.25°

- Manufacturer: Kart Service

- The product includes 2 teams

- Chassis: CRG - MARANELLO - CKR (OK - KZ - MINI KART)

- Pin diameter: 22mm

 - Tilt: 11°

- Manufacturer: Kart Service

- The product includes 2 teams

- Chassis: BIREL (OK - KZ - MINI KART)

- Pin diameter: 23mm

- Tilt: 10.5°

- Manufacturer: Dellorto

- CARBURATOR WITH AU SPRAY NOZZLE

- Manufacturer: Bell Helmets

- Lightweight carbon fiber/glass composite shell: 1,185 g in sizes 52 to 56 and 1,230 g in sizes 57 to 59 (+ or - 3%)

- 2 mm optically injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility

- Shell and visor design optimized for improved aerodynamic performance, reduced internal noise, and improved energy management

- Rear spoiler available separately

- Manufacturer: Otk - Tony Kart

- Brand: Lando Norris Kart

- Compatible with 8.5 lt tanks 0073.E0

- F1 2025 Graphic

- Manufacturer: Otk - Tony Kart

- Brand: Lando Norris

- Compatible with 3 liter tanks 0073.0D

- F1 2025 Graphics

- Manufacturer: Alpinestars

- Glove with adult sizes

- Enter the product and select the size: S - M - L - XL - XXL

- Glove not FIA approved

- Manufacturer: Alpinestars

- Glove with adult sizes

- Enter the product and select the size: S - M - L - XL - XXL

- Glove not FIA approved

- Manufacturer: Alpinestars

- Glove with adult sizes

- Enter the product and select the size: S - M - L - XL - XXL

- Glove not FIA approved

- Manufacturer: Schuberth

- THE FIRST STEPS INTO EXCELLENCE The brand new SK1 HYBRID represents our desire to take the karting experience of young drivers to new heights. 

The iconic SCHUBERTH Performance design, the SDL (Schuberth Dual Locking) System, and full compatibility with a wide range of accessories are all derived from our F1 helmets. 

Now even the youngest drivers can experience the same feeling of a world-champion helmet, while they dream and work towards becoming one. 

The blend of pre-pregs Carbon Fiber and pre-pregs Fiberglass guarantees the same characteristics at the core of all our helmets: safety, solidity, lightness.

- Available in sizes:   (XXS - 52/53cm) - (XS - 54/55cm) - (S - 56cm) - (M - 57cm) - (L - 58/59cm) - (L+ - 59+cm)

- Manufacturer: Bengio

- After years of research and development, we are proud to introduce AB1, our most advanced body protector, compliant with the FIA 8870-2018 STANDARD, designed to provide drivers with maximum safety and uncompromised comfort.

- Total protection: carbon fiber structure with high-absorption rubber padding to reduce impacts and vibrations.

- Maximum ergonomics: the ADAPTIVE CORE system ensures optimal flexibility and fit.
- Even lighter: 18% weight reduction compared to previous models for a smoother driving experience.

- Superior durability and performance: AB1’s resin polymerization process takes place entirely in an AUTOCLAVE, ensuring a flawless, high-performance composite structure with the best possible mechanical properties.
- Easy to wear: patented closure system for maximum practicality and safety.
- Made in Italy: entirely designed and handcrafted in our laboratories.

- Manufacturer: Bell Helmets- Manufacturer: Bell Helmets

- Ultralight premium carbon composite shell: 1,095 g in sizes 54 to 56 and 1,130 g in sizes 57 to 59 (+ or - 3%)

- 2 mm optically injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility

- Powerful and efficient upper and chin ventilation system with 14 intake and exhaust channels for maximum ventilation

- Rear spoiler available separately

- HP helmet bag included 

- Manufacturer: Otk - Tony Kart

- Graphics: Lando Norris F1 2025

- Compatible front fairing: M11 0306.FFP  (OK - KZ - DD2)

- The kit includes only the front fairing sticker

- Manufacturer: Otk - Tony Kart

- Graphics: KOSMIC F1 2025

- Compatible front fairing: M9  0306.AG  (MINI KART)

- The kit includes only the front fairing sticker

- Manufacturer: Alpinestars

- Glove with adult sizes

- Enter the product and select the size: S - M - L - XL - XXL

- Glove not FIA approved

- Manufacturer: Alfano

- Enter the product and select the probes

Temperature sensor extensions:

- A3301 for a water or spark plug temperature sensor (NTC type)

- A3401 for an exhaust or under-spark plug temperature sensor or Lambda (Type K)

- Included in the package is Alfano 7 2T, RPM cable, USB cable for battery charging, protective cover

- Manufacturer: Alfano

- Enter the product and select the probes

Temperature sensor extensions:

- A3301 for a water or spark plug temperature sensor (NTC type)

- A3401 for an exhaust or under-spark plug temperature sensor or Lambda (Type K)

- A2180 (hub) for two water temperature sensors or under spark plug + exhaust/Lambda (Type NTC + K)

- Included in the package is Alfano 7 2T, RPM cable, USB cable for battery charging, protective cover

- Manufacturer: Schuberth

- Compatible with helmets: Schuberth SF3ABP/SF4/SP1/SK1

- Position shown: 03

- Manufacturer: Tm Racing

- Manufacturer: Tony kart - Otk

- Graphics: Lando Norris F1 2025

- Otk M11 0302.H0 number plate sticker

- For chassis: OK - KZ - DD2

- Manufacturer: Tony kart - Otk

- Graphics: LANDO NORRIS F1 2025

- Otk M9 number plate sticker

- For chassis: MINI KART

- Manufacturer: Alpinestars

- Model: Supertech K

- FIA HOMOLOGATION

- Color: Fluo Yellow

- Enter the product and select from the available sizes: : 

- (34-US 2.5) - (35-US 3.5) - (36-US 4.5)

- (37-US 5) - (38-US 6) -(39-US 7)

- (40-US 7.5) - (40.US 5-8)- (41-US 8.5)

- (42-US 9) - (42.5-US 9.5) - (43-US 10) 

- (43.5-US 10.5)  - (44-US 11) - (45-US 11.5) 

- (45-US 12) - (46-US 12.5) - (47-US 13)

- Manufacturer: Alpinestars

- Model: Supertech K

- FIA HOMOLOGATION

- Color: Fluo Orange

- Enter the product and select from the available sizes: : 

- (34-US 2.5) - (35-US 3.5) - (36-US 4.5)

- (37-US 5) - (38-US 6) -(39-US 7)

- (40-US 7.5) - (40.US 5-8)- (41-US 8.5)

- (42-US 9) - (42.5-US 9.5) - (43-US 10) 

- (43.5-US 10.5)  - (44-US 11) - (45-US 11.5) 

- (45-US 12) - (46-US 12.5) - (47-US 13)

- Manufacturer: Alpinestars

- Model: Supertech K

- FIA HOMOLOGATION

- Color: White Black Gold

- Enter the product and select from the available sizes: : 

- (34-US 2.5) - (35-US 3.5) - (36-US 4.5)

- (37-US 5) - (38-US 6) -(39-US 7)

- (40-US 7.5) - (40.US 5-8)- (41-US 8.5)

- (42-US 9) - (42.5-US 9.5) - (43-US 10) 

- (43.5-US 10.5)  - (44-US 11) - (45-US 11.5) 

- (45-US 12) - (46-US 12.5) - (47-US 13)

- Manufacturer: Bell Helmets

- Same characteristics as KC7 CMR with attractive colour designs

- Clear Top and side Air intakes already mounted on the helmet

- Rear spoiler already mounted on the helmet

- Smoke ML Red shield Installed (SE07 2mm)

- HP helmet bag included

- Manufacturer: Bell Helmets

 - Same characteristics as KC7 CMR with attractive colour designs

- Clear Top and side Air intakes already mounted on the helmet

- Rear spoiler already mounted on the helmet

- Smoke ML Red shield Installed (SE07 2mm)

- HP helmet bag included

- Manufacturer: Bell Helmets

 - Same characteristics as KC7 CMR with attractive colour designs

- Clear Top and side Air intakes already mounted on the helmet

- Rear spoiler already mounted on the helmet

- Smoke ML Red shield Installed (SE07 2mm)

- HP helmet bag included

- Manufacturer: Bell Helmets

- Same characteristics as KC7 CMR with attractive colour designs

- Clear Top and side Air intakes already mounted on the helmet

- Rear spoiler already mounted on the helmet

- Smoke ML Red shield Installed (SE07 2mm)

- HP helmet bag included

- Manufacturer: Otk - Tony Kart

- Graphics: Lando Norris F1 2025

- Compatible fairing M10 0300.FDP for frames (OK - KZ - DD2)

- The Kit includes only the adhesive of the 2 side fairings

- Manufacturer: Otk - Tony Kart

- Graphics: LN F1 2025

- Compatible fairing M8 0300.AD for frames (MINI KART)

- The Kit includes only the adhesive of the 2 side fairings

- Position shown: 5

- Producer: Pvl

- Manufacturer: Bell Helmets

 - Same characteristics as KC7 CMR with attractive colour designs

- Clear Top and side Air intakes already mounted on the helmet

- Rear spoiler already mounted on the helmet

- Smoke ML Red shield Installed (SE07 2mm)

- HP helmet bag included

- Manufacturer: Otk - Tony Kart

- Brand: Lando Norris Kart

- Compatible with Ok, Kz Chassis

- F1 2025 Graphics

- Manufacturer: Otk - Tony Kart

- Brand: Lando Norris Kart

- Compatible with Mini Kart Chassis

- F1 2025 Graphics

- Position shown:06

- Manufacturer: Tm Racing

- FULL NON-TURNED insert

- Manufacturer: Bell Helmets

- Lightweight carbon fiber/glass composite shell: 1,185 g in sizes 52 to 56 and 1,230 g in sizes 57 to 59 (+ or - 3%)

- 2 mm optically injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility

- Shell and visor design optimized for improved aerodynamic performance, reduced internal noise, and improved energy management

- Rear spoiler available separately

- Manufacturer: Bell Helmets

- Lightweight carbon fiber/glass composite shell: 1,185 g in sizes 52 to 56 and 1,230 g in sizes 57 to 59 (+ or - 3%)

- 2 mm optically injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility

- Shell and visor design optimized for improved aerodynamic performance, reduced internal noise, and improved energy management

- Rear spoiler available separately

- Manufacturer: Bell Helmets

- Lightweight carbon fiber/glass composite shell: 1,185 g in sizes 52 to 56 and 1,230 g in sizes 57 to 59 (+ or - 3%)

- 2 mm optically injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility

- Shell and visor design optimized for improved aerodynamic performance, reduced internal noise, and improved energy management

- Rear spoiler available separately

- Manufacturer: Bell Helmets

- Lightweight carbon fiber/glass composite shell: 1,185 g in sizes 52 to 56 and 1,230 g in sizes 57 to 59 (+ or - 3%)

- 2 mm optically injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility

- Shell and visor design optimized for improved aerodynamic performance, reduced internal noise, and improved energy management

- Rear spoiler available separately

- Position shown: 7

- Manufacturer: BirelArt

- Manufacturer: Prisma Eletronics

- Prisma Electronics Multi Driver Stopwatch allows timing up to 4 competitors simultaneously, with the possibility of recording up to 5 sessions.

- You can save a total of 5 complete sessions, with a total of 600 laps and 5400 split times. For each session, you can recall the Date and Time of the session, the Air temperature, the top 3 laps for each driver, and up to 30 laps for each driver along with their split times and lap statistics.

- This fifth generation of precision instruments HPM5 stands out especially for its integration with a dedicated app, allowing WIRELESS connection to all models in the new line. Thanks to the app, you can download and view session data, export it to Excel or PDF, share it on the cloud with team members, and configure the instruments quickly and intuitively.

- Manufacturer: Omp

- NEW FIA 8877-2022 HOMOLOGATION.

- Top level karting gloves made in stretch fabric. 

- Enter in the product and select the size: (4 - 4/6 Anni) - (5 - 7/9 Anni) - (6 - 10/11 Anni) - XXS - SX - S - M - L -XL

- Manufacturer: Omp

- NEW FIA 8877-2022 HOMOLOGATION.

- Top level karting gloves made in stretch fabric. 

- Enter in the product and select the size: (4 - 4/6 Anni) - (5 - 7/9 Anni) - (6 - 10/11 Anni) - XXS - SX - S - M - L -XL

- Manufacturer: Parolin Racing Kart

- Compatible chassis:

- Manufacturer: Omp

- Model: KS-4 Art

- Color: Black - Cyan

- Enter the product and select the size: 4 - 5 - 6 - XXS - XS - S - M - L - XL

- Manufacturer: Omp

- Model: KS-4 Art

- Color: Navy Blue - Cyan

- Enter the product and select the size: 4 - 5 - 6 - XXS - XS - S - M - L - XL

- Manufacturer: Omp

- Model: KS-4 Art

- Color: Fluo Yellow - Black

- Enter the product and select the size: 4 - 5 - 6 - XXS - XS - S - M - L - XL

- Manufacturer: Omp

- Model: KS-4 Art

- Color: White - Blue

- Enter the product and select the size: 4 - 5 - 6 - XXS - XS - S - M - L - XL

- Manufacturer: Omp

- Model: KS-4 Art

- Color: Black - Orange

- Enter the product and select the size: 4 - 5 - 6 - XXS - XS - S - M - L - XL

- Manufacturer: Omp

- Model: KS-4 Art

- Color: Red - White

- Enter the product and select the size: 4 - 5 - 6 - XXS - XS - S - M - L - XL

- Manufacturer: Omp

- Model: Rainproof kart gloves in stretch fabric, precurved, with high grip silicon rubber palm. Water-repellent treatment with waterproof membrane to protect hands against rain and bad weather. External seams for maximum sensibility, slanted cut on wrist, elastic wrist stop to guarantee the best fitting.

- Color: Red - White

- Enter the product and select the size: XXS - XS - S - M - L - XL

- Manufacturer: Alpinestars

- Glove with adult sizes

- Enter the product and select the size: S - M - L - XL - XXL

- Glove not FIA approved

Enter in the product and select the size: XXS - XS - S - M - L - XL - XXL

- Position shown: 14

- Manufacturer:

- The main feature compared to the original manifold is the increase in power at medium and high revs.

Waiting time from order 5 weeks

Enter the product and select from the available size: 120 - 130 - 140 - 150 - 160 - 42 - 44 - 46 - 48 - 50 - 52 - 54 - 56 - 58

- Manufacturer: New-Line

- Weight: 160Gr

- Manufacturer: Omp

- The KS-3 shoes are designed for beginner drivers looking for flexibility and ease of use. Made of soft suede, they offer a comfortable fit and a karting-specific sole for maximum control.

- Supports the confidence and development of drivers new to the sport.

- Lightweight suede upper accommodates a wide range of foot shapes.

- Padded tongue and breathable mesh insert enhance comfort.

- Rear gusset and lateral reinforcement for support.

- Two-tone outsole for traction and pedal feel.

- Enter the product and select your size: 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47

- Manufacturer: OMP

- High-cut polyurethane karting boots with a waterproof membrane under the laces and a high ankle to protect your feet from rain and bad weather.

- Adjustable double strap with Velcro closure and rear gusset for increased comfort and freedom of movement. High-strength lateral protection on the toe. The high-grip injected sole and lightweight design make these boots perfect for riding in all weather conditions, not just rain.

- NEW FIA 8877-2022 APPROVAL.

- Enter the product and select the size: 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47

- Manufacturer: Omp

- The KS-3 shoes are designed for beginner drivers looking for flexibility and ease of use. Made of soft suede, they offer a comfortable fit and a karting-specific sole for maximum control.

- Supports the confidence and development of drivers new to the sport.

- Lightweight suede upper accommodates a wide range of foot shapes.

- Padded tongue and breathable mesh insert enhance comfort.

- Rear gusset and lateral reinforcement for support.

- Two-tone outsole for traction and pedal feel.

- Enter the product and select your size: 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47

- Manufacturer: Omp

- The KS-3 shoes are designed for beginner drivers looking for flexibility and ease of use. Made of soft suede, they offer a comfortable fit and a karting-specific sole for maximum control.

- Supports the confidence and development of drivers new to the sport.

- Lightweight suede upper accommodates a wide range of foot shapes.

- Padded tongue and breathable mesh insert enhance comfort.

- Rear gusset and lateral reinforcement for support.

- Two-tone outsole for traction and pedal feel.

- Enter the product and select your size: 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47

- Manufacturer: Omp

- The KS-3 shoes are designed for beginner drivers looking for flexibility and ease of use. Made of soft suede, they offer a comfortable fit and a karting-specific sole for maximum control.

- Supports the confidence and development of drivers new to the sport.

- Lightweight suede upper accommodates a wide range of foot shapes.

- Padded tongue and breathable mesh insert enhance comfort.

- Rear gusset and lateral reinforcement for support.

- Two-tone outsole for traction and pedal feel.

- Enter the product and select your size: 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47

- Manufacturer: Bell Helmets

- Manufacturer: Bell Helmets

- Position shown: 26

- Manufacturer: Selettra

- Restrictor: 13,000 RPM

- Homologation: 034-IG-13

- APPROVED FOR RACES UNTIL DECEMBER 31, 2028

- THE BLUE CONTROL UNIT CAN STILL BE USED UNTIL DECEMBER 31, 2026

- Manufacturer: Bell Helmets

- Manufacturer: Bell Helmets

- Manufacturer: OMP

- The KS-4 suit combines functionality and style thanks to its lightweight construction, breathable zones, and contrasting trim. Designed for karting sessions where heat management and comfort directly impact concentration.

- Durable polyester exterior with ultra-breathable mesh lining. Laser-cut micro-perforations in strategic areas for improved breathability and temperature control (AirFlow system).

- Floating sleeves and ergonomic stretch insert on the back

- Contrasting stripes and cuffs for visual distinction

- Adjustable waist belt for a personalized fit

- Self-locking zipper with OMP-branded puller

- Available in Child sizes: 120cm - 130cm - 140cm - 150cm

- Available in adult sizes: S - L - XL - XXL

- Enter the product and select the size

- Manufacturer: OMP

- The KS-4 suit combines functionality and style thanks to its lightweight construction, breathable zones, and contrasting trim. Designed for karting sessions where heat management and comfort directly impact concentration.

- Durable polyester exterior with ultra-breathable mesh lining. Laser-cut micro-perforations in strategic areas for improved breathability and temperature control (AirFlow system).

- Floating sleeves and ergonomic stretch insert on the back

- Contrasting stripes and cuffs for visual distinction

- Adjustable waist belt for a personalized fit

- Self-locking zipper with OMP-branded puller

- Available in Child sizes: 120cm - 130cm - 140cm - 150cm

- Available in adult sizes: S - M - L - XL - XXL

- Enter the product and select the size

- Manufacturer: OMP

- The KS-4 suit combines functionality and style thanks to its lightweight construction, breathable zones, and contrasting trim. Designed for karting sessions where heat management and comfort directly impact concentration.

- Durable polyester exterior with ultra-breathable mesh lining. Laser-cut micro-perforations in strategic areas for improved breathability and temperature control (AirFlow system).

- Floating sleeves and ergonomic stretch insert on the back

- Contrasting stripes and cuffs for visual distinction

- Adjustable waist belt for a personalized fit

- Self-locking zipper with OMP-branded puller

- Available in Child sizes: 120cm - 130cm - 140cm - 150cm

- Available in adult sizes: S - M - L - XL - XXL

- Enter the product and select the size

- Manufacturer: OMP

- The KS-4 suit combines functionality and style thanks to its lightweight construction, breathable zones, and contrasting trim. Designed for karting sessions where heat management and comfort directly impact concentration.

- Durable polyester exterior with ultra-breathable mesh lining. Laser-cut micro-perforations in strategic areas for improved breathability and temperature control (AirFlow system).

- Floating sleeves and ergonomic stretch insert on the back

- Contrasting stripes and cuffs for visual distinction

- Adjustable waist belt for a personalized fit

- Self-locking zipper with OMP-branded puller

- Available in Child sizes: 120cm - 130cm - 140cm - 150cm

- Available in adult sizes: M - XXL

- Enter the product and select the size

- Manufacturer: OMP

- Classic, cut-and-sewn karting suit, made with a lightweight, durable outer fabric and a soft knit inner layer.

- 360° floating armholes for maximum freedom of movement

- Two practical external pockets

- New, exclusive design and cut, available in a wide range of colors and sizes

- FIA8877-2022 approved

- Enter the product and select your size: 42 - 44 - 46 - 48 - 50 - 52 - 54 - 56 - 58 - 60

- Manufacturer: Kart Service

- The helmet holder is primarily used under the tent, but it can be bolted anywhere. Foldable and chrome-plated, it takes up little space and is very easy to clean.

- If your driver always puts his helmet where it shouldn't be, this is the perfect gift!

- Manufacturer: Omp

- Long-sleeved underwear for karting made from lightweight, insulating, and breathable fabrics. The 3D structure allows for rapid sweat wicking, keeping the body dry even under stressful conditions.

- Made from Dryarn®, a high-performance fiber highly regarded in all sports competitions, which offers comfort in all conditions thanks to its innovative construction.

- Enter the product and select the size: 8-10 years - 10-12 years - XS/S - M/L - XL/XXL

- Manufacturer: Omp

- Long-sleeved underwear for karting made from lightweight, insulating, and breathable fabrics. The 3D structure allows for rapid sweat wicking, keeping the body dry even under stressful conditions.

- Made from Dryarn®, a high-performance fiber highly regarded in all sports competitions, which offers comfort in all conditions thanks to its innovative construction.

- Enter the product and select the size: 8-10 years - 10-12 years - XS/S - M/L - XL/XXL

- Manufacturer: Omp

- Long-sleeved underwear for karting made from lightweight, insulating, and breathable fabrics. The 3D structure allows for rapid sweat wicking, keeping the body dry even under stressful conditions.

- Made from Dryarn®, a high-performance fiber highly regarded in all sports competitions, which offers comfort in all conditions thanks to its innovative construction.

- Enter the product and select the size: 8-10 years - 10-12 years - XS/S - M/L - XL/XXL

- Manufacturer: Omp

- Long-sleeved underwear for karting made from lightweight, insulating, and breathable fabrics. The 3D structure allows for rapid sweat wicking, keeping the body dry even under stressful conditions.

- Made from Dryarn®, a high-performance fiber highly regarded in all sports competitions, which offers comfort in all conditions thanks to its innovative construction.

- Enter the product and select the size: 8-10 years - 10-12 years - XS/S - M/L - XL/XXL

- Manufacturer: Bell Helmets

- Compatible with Bell helmets: KC7 EV CMS

- Thickness: 2mm

- Color: Clear

- Model: SE07

- Manufacturer: Bell Helmets

- Compatible with Bell helmets: KC7 CMS

- Thickness: 2mm

- Color: YELLOW

- Model: SE07

-DOT 1
This gives you the least possible amount of castor for the TonyKart / OTK chassis. The higher the number goes the MORE castor you gain.

- DOT 2
For more castor than the DOT 1 castor pill where you require more castor and improved turn in and mid corner front end grip

- Blank Castors
The gives you half castor in between the standard zeo / full castor. Very good in both cold and warm conditions. For when you require more inside rear wheel life and more release from corner grip.

- DOT 4
For more castor than the standard OTK full castor kit. Great In wet conditions where you may require more front mid corner grip.

- DOT 5
For even more castor then the blank and DOT 4 castors. Great for really wet conditions where you require the most turn in and mid corner front end grip possible.

- Manufacturer: Bell Helmets

- Compatible with Bell helmets: KC7 CMR

- Thickness: 2mm

- Color: Black

- Model: SE07